10HP Water Heater Commercial Air Source Heat Pump Equipment for Central Heating
Air source heat pump Features
(1) The air source heat pump system is a combination of cold and heat sources. There is no need to set up a special freezer room or boiler room. The unit can be placed on the roof or the ground at will, without occupying the effective use area of the building. The construction and installation is very simple.
(2) The air source heat pump system has no cooling water system, no cooling water consumption, and no power consumption of the cooling water system. In addition, there have been many reports of Legionella infections caused by cooling water pollution. From the perspective of safety and hygiene, considering air source heat pumps also has obvious advantages.
(3) Air source heat pump system Because the boiler is not needed, the corresponding boiler fuel supply system, dust removal system and flue gas emission system are not needed, the system is safe and reliable, and has no pollution to the environment.
(4) Air source heat pump The cold (hot) water unit adopts modular design. It does not need to set up a standby unit. During the operation, the computer automatically controls and adjusts the running status of the unit to make the output power adapt to the working environment.
(5) The performance of air source heat pumps will vary with outdoor climate changes.
(6) In places where the outdoor air temperature in the north of China is low, an auxiliary heater is required due to insufficient heat supply in the winter of the heat pump.
Advatanges
- It is 40% energy-saving than that of electric AC unit in heating. it is more econonmical than other furnaces and without any pollution.
- This air-source heat pump produce hot water circulation in the system, safe and comfortable than other heating methods
- The machine is high in automation, easy operation
- Service life at least 20 years
Yushen air source heat pump
- Suitable for environmental temperature:-25℃ to +45 ℃ /-13℉ to 113 ℉
- 35% more powerful than other products, long heating time and less defrosting time
- No capacity decay under low temperature, keep high COP
- Quality Components such as Copeland compressor, Danfoss valves
- Pay attention to details such as every stainless-steel screw has cushion to prevent from water corrosion
- Clean and clear wiring and lining
- 100% finished products testing
Parameter of this model
| Model | SDWA-034YBcode name.pdf |
| Compressor capacity | 10HP |
| Function | Heat |
| Electricity | 380V 3N-50Hz |
| Working conditions | ℃ | -25~+43 |
| Nominal heating capacity | KW | 34 |
| COP | KW/KW | 4 |
| Nominal input power | KW | 8.25 |
| Max. running currency | A | 23 |
| Highest water temperature | ℃ | 60 |
| Compressor quantity | Set | 2 |
| Refrigerant/charging quantity kg | / | R22/3.7*2 |
| Air blow type | / | Top |
| Water pipe diameter | / | 1 1/2'' |
| Rating flow | m³/h | 6 |
| Water side pressure loss | kPa | ≤45 |
| Noise level | dB(A) | 62 |
| Overall dimensions(L×W×H) | mm | 1530×750×1370 |
| Weight | kg | 320 |
Nominal heating conditions:ambient dry bulb temperature 7℃, web bulb temperature 6℃, water inlet temperature 9℃,water outlet temperature 55℃
Check more model herecatalogs-email.pdf
