Shandong Yushen Energy Technology Co., Ltd.
Shandong Yushen Energy Technology Co., Ltd.
Add to Cart
Energy Saving Eco Swimming Pool Heat Pump / Efficient Above Ground Pool Heat Pump
Eco Swimming Pool Heat Pump Description
Eco Swimming Pool Heat Pump FEATURES
1) High energy and efficiency of EER 500%,by absorbing abient air heat to heating the swimming pool.
2) It can save more than 80% operating cost than electric heating pump,and with long working life.
3) The heating pump is made of PVC and titianium tube,can bears long time in the water of swimming pool.
4) Easy to install and maintain:turn on the power supply to set up the proper temperature.
5) Each pump accessorize an NC controllor,opertating parameter can be set automatic ,LED digital micro-computer control show the operating condition instantaneously.
Eco Swimming Pool Heat Pump Model selection
| Model | SDWA-017Y | SDWA-034YB | SDWA-075YB | |||
| Compressor capacity | 6HP | 10HP | 25HP | |||
| Function | Heat | Heat | Heat | |||
| Electricity | 380V 3N-50Hz | 380V 3N-50Hz | 380V 3N-50Hz | |||
| Working conditions | ℃ | -25~+43 | -25~+43 | -25~+43 | ||
| Nominal heating capacity | KW | 17 | 34 | 75 | ||
| COP | KW/KW | 4.1 | 4 | 4 | ||
| Nominal input power | KW | 4.14 | 8.25 | 20.5 | ||
| Max. running currency | A | 11.5 | 23 | 60 | ||
| Highest water temperature | ℃ | 60 | 60 | 60 | ||
| Compressor quantity | Set | 1 | 2 | 2 | ||
| Refrigerant/charging quantity kg | / | R22/4.8 | R22/3.7*2 | R22/10*2 | ||
| Air blow type | / | Top | Top | Top | ||
| Water pipe diameter | / | 1 1/2'' | 1 1/2'' | 50 | ||
| Rating flow | m³/h | 3 | 6 | 12 | ||
| Water side pressure loss | kPa | ≤45 | ≤45 | ≤45 | ||
| Noise level | dB(A) | 62 | 62 | 62 | ||
| Overall dimensions(L×W×H) | mm | 860×820×1080 | 1530×750×1370 | 2100×1100×2080 | ||
| Weight | kg | 197 | 320 | 830 | ||
Service
QC
Every process must be strictly operated and inspected by our quality persons.
Some main points as below:
1. Check all parts before assembling.
2. Charge nitrogen to test leakage and pressure maintaining after welding system.
3. Vacuumize, the vacuum pressure ≤30Pa
4. Leakage detection by halogen after charge refrigerant.
5. Safety testing: High-voltage insulation test and ground resistance.
6. 100% Operation testing, record refrigerant pressure, temp. etc.
7. Inspect inside unit’s cleanliness and appearance.
8.Lables and package.